Wastewater stations

Control wastewater pumps with Metirius WW

Metirius WW is a field panel that reads the wet well level and pump status on site at wastewater lift stations and runs the pumps accordingly. The panel provides three variable-frequency drives (VFD) in the 0.75–75 kW range and inputs for a level sensor or one to six float switches.

Metirius wastewater pump control panel with a display slot, in front of a concrete wall

The panel’s role at the collection point

Metirius WW panels are used to control pumps at wastewater stations. The wet well level and the pumps’ operating status are read on site, and the pumps are run through the drives based on this data.

Collection points become part of the end-to-end field view: problems in collection and transfer are seen together with the other stages of the system. Metirius devices can communicate with other Metirius devices for fully automatic control.

  • Wet well levellevel sensor or one to six float switches
  • Pumpsup to three pumps, each with a 0.75–75 kW VFD
  • Rising mainflow meter and outlet pressure sensor
  • Energythe pumps’ electrical load via an energy analyser and current transformers

Components and technical specifications

ItemSpecification
Control unitIoT-enabled PLC, RTU or industrial PC; HMI display
DriveThree 0.75–75 kW VFDs
Sensor and measurement inputsLevel sensor input or one to six float switch inputs; flow meter input; outlet pressure sensor input; energy analyser and current transformers
Inputs and outputsDigital and analogue I/O modules
CommunicationThree RS-485 ports, CAN bus support; GSM/RF communication device: 2G, 3G, 4G or LoRa
Power200–500 VAC or 24 VDC input; isolation transformer; AC/DC battery charging system
EnclosureSheet-metal or PVC enclosure, depending on the application
SoftwarePredixi WIS integration

Wet well and pumps at the centre

The wet well level, the pumps’ operating status, voltage and current values, and the flow and pressure in the rising main are monitored together in the wastewater station view.

Predixi WIS screen of a wastewater station: wet well level, three pumps, and flow and pressure in the rising main

Designed around your operation.

Tell us how many pumps your wastewater station has and how the level is measured, and we will specify the panel together.